Description: How to configure allo 3rd generation card in asterisk vicidial goautodial
The Following tutorial will help you in configuring the Allo 3rd gen upgradeable PRI card in vicidiail goautodial or asterisk based pbx's
Steps
1. Uninstalling the existing Dahdi driver
2. Allo card Licensing
3. Installing the Allo patched Dahdi driver
4. configuring the Card
5. dialplan
Step 1: Removing the existing Dahdi driver
Follow step 1 from the below link for the uninstalling the Dahdi driver
Link
Step 2: Allo Card Licensing
- Log on to the https://license.allo.com
- Enter the particular details of the card (Serial Number) along with your Email id, Phonenumber, and select the country.
- Click generate license button, to generate the license.
- After submitting, user will receive the license to the email id provided.
- Download and copy the License file to the machine where the card is being installed in the following directory “lib/firmware”. (use winscp to copy the file)
Step 3 : Installing the Allo patched Dahdi driver
- Download the latest dahdi driver from the below link
- as of this tutorial i am using dahdi 2.10.0.1 - download-link
In the linux console type
cd /usr/src
wget https://www.allo.com/dahdi/releases/dahdi-linux-complete-2.10.0.1+2.10.0.1.tar.gz
tar -xvzf dahdi-linux-complete-2.10.0.1+2.10.0.1.tar.gz
cd dahdi-linux-complete-2.10.0.1+2.10.0.1
make clean
make all
make install
** now the dahdi driver is installed , we need to add the allo driver name in the dahdi module file
** type in console
vi /etc/dahdi/modules
at the last line add alloPL4xxp
save and exit .
Step 4 : configuring the Card
Now type
dahdi_genconf -vvv
make sure you will get the below output
Now type
vi /etc/asterisk/chan_dahdi.conf
add #include dahdi-channels.conf at the last line fo chan_dahdi.conf file ,
save and exit.
Now type
dahdi_cfg -vvv
*** this displays the channels configured
Reloading the module in asterisk
go to asterisk cli by typing
asterisk -vvvvvr
goautodial>module unload chan_dahdi.so
goautodial>module load chan_dahdi.so
Checking the status of the Card and pri line
goautodial>dahdi show status
goautodial>pri show spans
*** Now the card is configured and ready to dial.
Step 5 : dialplan for those using vicidial or goautodial or plain asterisk.
Add the following dialplan in the extensions.conf (vi /etc/asterisk/extensions.conf)
under the context [default]
exten => _9X.,1,AGI(agi://127.0.0.1:4577/call_log)
exten => _9X.,2,Dial(DAHDI/G0/${EXTEN:1},,tTor)
exten => _9X.,3,Hangup
For detail about dialplan guide check this link
note: for those using Freepbx, elastix use the gui to configure the trunk .
Note : For inbound setup in vicidial or goautodial , change the context from-pstn to trunkinbound in vi /etc/asterisk/dahdi-channels.conf
3aCP1e/3aCP2e/3aCP4e allo 3rd gen PRI card with asterisk
allo 3rd gen PRI card with vicidial
allo 3rd gen PRI card with goautodial